4420C10 REAR SUSPENSION STABILIZER BAR - R+R - Alfa - GT - eLearn

125001459 - 4420C10 REAR SUSPENSION STABILIZER BAR - R+R

) Position the vehicle on the ramp1. Undo the nuts securing the rear suspension anti-roll bar joints to the antiroll bar.2. Undo bolts (2a) and remove rear suspension antiroll bar (2b) complete with mounting blocks (2c).

Refitting ( Removing

) 1. Refit rear suspension antiroll bar (1a), complete with mounting blocks, and secure it by tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	-	-	-	-

2. Tighten the nuts securing the rear suspension antiroll bar joints to the antiroll bar to the specified torque.

	Fastening	Component	Ø	Value(daNm)
2	Nut	REAR ANTI-ROLL BAR PIVOTS	M10	Anti-roll bar/shock absorber side.) 4.1 ÷ 5.0

Remove the car from the ramps.