125001564 - 5050B10 FRONT WINDSCREEN WASHER JETS - R+R CLEAN AND/OR POSITION

Removing ( Refitting ) Open the bonnet lid.1. Using the special tool, release the retaining buttons at the side of the sound insulation lining.

	Name	Country
1	Scraper blade	1.823.015.000

1. Gently lower the sound insulation lining.2. Disconnect the windscreen washer jet pipe.3. Disconnect the electrical connection for the heated windscreen washer jet.

	Name	Connector
3	Left windscreen washer jet defrosting resistance	See O50 LEFT WINDSCREEN WASHER JET DEFROSTING RESISTANCE ( FRONT )

	Name	Connector
3	Right windscreen washer jet defrosting resistance	See O51 RIGHT WINDSCREEN WASHER JET DEFROSTING RESISTANCE ( FRONT )

4. Using pliers, release the retainers and remove the windscreen washer jet. Refitting ( Removing ) Check that the jet is not damaged or obstructed.Connect the pipe to the windscreen washer jet.Connect the electrical connection for the heated windscreen washer jet.Fit the jet in the housing engaging the retainers.Fit the soundproofing trim.Engage the retaining buttons.Close the bonnet lid.1. Act on the screw to adjust the spray on the windscreen.Test the operation of the windscreen washer jet.