125001605 - 5510C14 IGNITION COIL/S - R+R

Removing ( Refitting ) Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-)

	Description	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with the removal    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.1. Disconnect the electrical connections from the ignition coils.

	Description	Connector
1	Ignition coil	See A30 IGNITION ''COIL

1. Undo the bolts (1a) and remove the ignition coils (1b). Refitting ( Removing ) Replace the ignition coils in their housings and secure them tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

Connect the electrical connections to the ignition coils.Proceed with the refitting    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Connect the negative battery terminal (-).