125001818 - 7015B10 SINGLE TAILGATE LOCK - R+R OR REPAIR WITH PANEL/PROTECTION REMOVED

Removing ( Refitting ) 1. Undo the bolts.2. Gently withdraw the lock with motor and disconnect the electrical connections (2a, 2b).

	Name	Connector
2a	Boot opening switch	See I11 BOOT OPENING SWITCH

	Name	Connector
2b	Boot opening geared motor	See N57 BOOT OPENING GEARED MOTOR ( CONNECTORS )

3. Keep the lock and motor complete with tailgate opening safety cable. Refitting ( Removing ) Check that the lock with motor is not damaged.Connect the electrical connections .Position the lock and motor complete with tailgate opening safety cable.Tighten the bolts.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	TAIL-GATE LOCK	M6	08

If necessary, adjust the lock striker:    Op. 7015A10 TAILGATE - ADJUST STRIKER AND ADAPT SEAL IF NECESSARY.