125001986 - 7065A14 ANCHORAGE ROD FOR , (ONE), FRONT SEAT BELT LEFT OR RIGHT - R.R.

Removing ( Refitting )     Op. 7045A10 L/H OR R/H FRONT SEAT (ONE) - R+R1. Working under the seat, disconnect the retainer (1a) and turn connector carrier bracket (1b) until it is accessible.2. Disconnect the connector from the rail-type retainer3. Disconnect the wiring from the retainer.4. Disconnect the retaining bands (4a) from the wiring (4b) for the seat belt anchor link.
1. Remove the cover.2. Unscrew the anchorage link retaining bolt.3. Remove the anchorage link complete with wiring
Refitting ( Removing ) Check that the anchorage link is not damaged.Fit the anchorage link complete with wiringTighten the bolt securing the anchorage link.

FasteningComponentØValue(daNm)
-BoltFRONT SEAT BELT BRANCH WITH ATTACHMENT BUCKLE.. .M7/16''''4.0
Fit the cover.Connect the seat belt anchorage link cable with the retaining bands.Secure the wiring to the retainer.Connect the connector to the rail-type retainer.Turn the connector carrier bracket in its seat and engage the retainer.    Op. 7045A10 L/H OR R/H FRONT SEAT (ONE) - R+RCheck that the anchorage link and the warning light on the instrument panel are working properly.