125001368 - 3340A35 LEFT REAR WHEEL RPM SENSOR - R R
 Removing
		(
		Refitting
Removing
		(
		Refitting )
		)
	- Position the vehicle on a lift.
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
| Description | Connector | |
|---|---|---|
| - | Battery | See A001 Battery | 
- Undo the fastenings and remove the luggage compartment side trim.

- Move the luggage compartment trim and disconnect the electrical connection for the left rear wheel rpm sensor.
| Description | Connector | |
|---|---|---|
| 1 | Left rear wheel sensor for ABS | See K75 REAR WHEEL SENSOR LEFT FOR ABS | 

- Release the electrical wiring for the left rear wheel rpm sensor from the fastenings.
- Undo the bolt (2a) and remove the left rear wheel rpm sensor (2b) complete with electrical wiring.

 Refitting
		(
		Removing
Refitting
		(
		Removing )
		)
	- Place the left rear wheel rpm sensor back in its housing complete with electrical wiring and secure it tightening the bolt to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| - | Bolt | REAR WHEEL RPM SENSOR (ABS) | M6 | 0.7 ÷ 0.9 | 
- Connect the electrical connection for the left rear wheel rpm sensor.
- Place the luggage compartment trim back in its housing.
- Place the luggage compartment side trim back in its housing and secure it.
- Connect the negative battery terminal (-).
- Remove the vehicle from the lift.