5530B52 BATTERY DRIP TRAY/SUPPORT - R.R. - Alfa - GT - eLearn

125001644 - 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.

) Proceed with removal Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R.

) Refit the battery cage in its seating and fix it with its bolts.Secure the electrical wiring to the fastenings ont the battery drip tray.Tighten the nuts fixing the air filter to the battery drip tray.Place the engine compartment junction unit casing mounting in its housing and secure it using the nuts.Place the engine compartment junction unit casing in its housing and fasten it using the nut.Place the plug back in position.Place the engine compartment junction unit in its housing securing it to the hinges.Connect the electrical connection to the engine compartment junction unit and rotate it in its housing.Place the engine compartment junction unit cover in position.Proceed with the refitting Op. 5530B10 BATTERY - R+R Proceed with removal Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R.. Proceed with removal Op. 5530B10 BATTERY - R+R1. Remove the cover for the junction unit in the engine compartment.

1. Rotate the engine compartment junction unit.2. Disconnect the electrical connection from the engine compartment junction unit.

	Name	Connector
2	Engine compartment junction unit	See B1E ENGINE COMPARTMENT JUNCTION UNIT ( CROSSMEMBER )

Release the engine compartment junction unit from the hinges and move it to the side.

1. Remove the plug (1a), undo the nut (1b) and remove the engine compartment junction unit casing (1c) to the side.

1. Undo the nuts (1a) and remove the engine compartment junction unit casing support (1b).

1. Undo the nut fixing the air filter to the battery drip tray.

Release the electrical wiring from the fastenings on the battery drip tray.1. Undo the bolts (1a), slacken the bolt (1b) and remove the battery drip tray (1c).