125000858 - 0510C20 LUBRICATION SYSTEM - CHECK DELIVERY PRESSURE

Start the car and let it warm up until the radiator cooling fan has come on twice.Position the vehicle on a lift.Proceed with the removal    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with the removal    Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R.Proceed with the removal    Op. 1084A42 ENGINE OIL TEMPERATURE SENDER UNIT - R + R.1. Fit the engine oil pressure warning light switch in the housing.

	Description	Code
1	Connector	1.860.969.000

2. Fit the pressure gauge.Start up the engine only for long enought to check that the engine lubrication system supply pressure is within the recommended values.

	Measurement		Value
-	Clearance between piston - cylinder liner (mm)	Category A	0.038 - 0.058
Category B	0.039 - 0.061
Category C	0.042 - 0.062

	Measurement		Value
-	Engine oil pressure at 4000 rpm (bar)		6

Remove the pressure gauge.Remove the tool.

	Description	Code
-	Connector	1.860.969.000

Proceed with the refitting    Op. 1084A42 ENGINE OIL TEMPERATURE SENDER UNIT - R + R.Proceed with the refitting    Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R.Proceed with the refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Remove the vehicle from the lift. [PA1]