125000914 - 1016E38 SINGLE CYLINDER HEAD OR (ONE) L OR R, REMOVED - GRINDING

Clean any residues of sealant from the matching surfaces of the cylinder head and front journal cap.Check that the planarity of the lower cylinder head surface is within the recommended values.

MeasurementValue
-Cylinder head lower plane planarity (mm)0.1
1. If the planarity of the lower cylinder head surface is not within the recommended values, reface the lower cylinder head surface without exceeding the minimum permissible height for the combustion chamber.

MeasurementValue
1Combustion chamber minimum permissible height (mm)12.8 ÷ 13.2
The volume of the combustion chamber for each cylinder is given below.

MeasurementValue
-Combustion chamber volume (c.c.)38.2