1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE - Alfa - GT - eLearn

125001015 - 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with removal Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+RProceed with removal1. Remove the cover for the junction unit in the engine compartment. Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R.

1. Rotate the engine compartment junction unit.2. Disconnect the electrical connection from the engine compartment junction unit.

	Name	Connector
2	Engine compartment junction unit	See B1E ENGINE COMPARTMENT JUNCTION UNIT ( CROSSMEMBER )

Release the engine compartment junction unit from the hinges and move it to the side.3. Remove the plug (3a), undo the nut (3b) and remove the engine compartment junction unit casing (3c) to the side.

1. Undo the nuts (1a) and remove the engine compartment junction unit casing support (1b).

1. Undo the nut fixing the air filter to the battery drip tray.

1. Disconnect the electrical connection from the air flow meter.

	Name	Connector
1	Air flow meter	See K41 AIR FLOW METER ( FRONT )

Proceed with removal Op. 7055B54 UNDER-ENGINE GUARD - R R1. Undo the nut (1a) and disconnect the earth lead (1b).2. Loosen the band and disconnect the cold air intake from the air filter.

	Name	Connector
1b	Battery earth	See C1 BATTERY EARTH

1. Remove the air filter (1a) complete with air flow meter (1b).

Refitting ( Removing

) Replace the air filter, complete with air flow meter, in its housing.Connect the air filter cold air intake and secure it using the band.Connect the earth lead and fix it using the nut.Proceed with removal Op. 7055B54 UNDER-ENGINE GUARD - R R.Connect the electrical connection to the air flow meter.Tighten the nuts fixing the air filter to the battery drip tray.Place the engine compartment junction unit casing mounting in its housing and secure it using the nuts.Place the engine compartment junction unit casing in its housing and fasten it using the nut.Place the plug back in position.Place the engine compartment junction unit in its housing securing it to the hinges.Connect the electrical connection to the engine compartment junction unit and rotate it in its housing.Place the engine compartment junction unit cover in position.Proceed with refitting Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R..Proceed with refitting Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Connect the negative (-) battery terminalRemove the car from the ramps.