125001072 - 1068A18 ACCELERATOR PEDAL WITH BUILT-IN POTENTIOMETER - R R (Smart gearbox)

Removing ( Refitting )

  • Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
DescriptionConnector
-Battery See A001 Battery
1. Disconnect the electrical connection from the accelerator pedal potentiometer.
DescriptionConnector
-Accelerator pedal potentiometer See K55 ACCELERATOR PEDAL POTENTIOMETER
2. Undo the bolts (2a) and remove the accelerator pedal with built in potentiometer (2b).
Refitting ( Removing )

  • Place the accelerator pedal with built in potentiometer back in its housing and secure it using the bolts.
  • Connect the electrical connection to the accelerator pedal potentiometer.
  • Connect the negative battery terminal (-).