125001099 - 1076B10 EXHAUST PIPE ASSEMBLY - R + R

Removing ( Refitting ) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Drain the air conditioner coolant circuit    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM DEHYDRATE AND RECHARGE.Proceed with removal    Op. 4450B04 RIGHT FRONT WHEEL R RProceed with removalProceed with removal    Op. 7055B54 UNDER-ENGINE GUARD - R RProceed with removalProceed with removal    Op. 5040A20 AIR CONDITIONER COMPRESSOR - R+R - INCLUDES FLUID LEVEL CHECK AND TOP UP IF NECESSARYProceed with removalProceed with removal    Op. 5040A26 COMPRESSOR MOUNT - R R1. Undo the bolt securing the collar supporting the rigid exhaust pipe section between the catalytic converter and silencer to the relevant bracket.2. Undo the bolts securing the rigid exhaust pipe section between the catalytic converter and silencer.    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R3. Remove the rigid exhaust pipe section between catalytic converter and silencer (3a) and rear gasket (3b).    Op. 1076A48 CATALYTIC CONVERTER HEAT SHIELD - R R    Op. 1080B62 CATALYTIC CONVERTER - R + R 1. Undo the bolts securing the front exhaust silencer to the intermediate exhaust silencer.2. Remove the front exhaust silencer (2a), after releasing it from the flexible mounts (2b).3. Remove the seal. 1. Loosen the collar fixing the rear exhaust silencer to the intermediate exhaust silencer.2. Remove the intermediate exhaust silencer (2a) after releasing it from the flexible support (2b) and the rear exhaust silencer. 1. Remove the rear exhaust silencer (1a) after releasing it from the flexible supports (1b). Refitting ( Removing ) Refit the rear exhaust silencer in its seating and secure it to the relevant flexible supports.Refit the intermediate exhaust silencer in its seating, connect it to the rear exhaust silencer and secure it to the relevant flexible support.Tighten the collar fixing the rear exhaust silencer to the intermediate exhaust silencer.1. Refit in its seating the front exhaust silencer (1a) complete with seal (1b) and secure it to the flexible supports (1c).2. Tighten the bolts securing the front exhaust silencer to the intermediate silencer to the specified torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	FRONT EXHAUST SILENCER	M8	(Intermediate silencer side 23 28

1. Refit in its seatign the rigid exhaust pipe section between the catalytic converter and silencer (1a) complete with rear gasket (1b).2. Tighten the bolts securing the rigid exhaust pipe section between catalytic converter and silencer to the specified torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	RIGID EXHAUST PIPE	M8

3. Tighten the bolt securing the collar supporting the rigid exhaust pipe section between catalytic converter and silencer to the relevant bracket. Proceed with refitting    Op. 1080B62 CATALYTIC CONVERTER - R + R.Proceed with refitting    Op. 1076A48 CATALYTIC CONVERTER HEAT SHIELD - R R.Proceed with refitting    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Proceed with refitting    Op. 5040A26 COMPRESSOR MOUNT - R R.Proceed with refitting    Op. 5040A20 AIR CONDITIONER COMPRESSOR - R+R - INCLUDES FLUID LEVEL CHECK AND TOP UP IF NECESSARY.Proceed with refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with refitting    Op. 4450B04 RIGHT FRONT WHEEL R R.Fill the air conditioner coolant circuit    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM DEHYDRATE AND RECHARGE.Connect the negative (-) battery terminalRemove the car from the ramps.