125001100 - 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 7055B54 UNDER-ENGINE GUARD - R R1. Undo the bolt securing the collar supporting the rigid exhaust pipe section between converter and silencer to the relevant bracket.2. Undo the bolts securing the rigid exhaust pipe section between converter and silencer to the catalytic converter.3. Undo the bolts securing the rigid exhaust pipe section between converter and silencer to the front silencer.4. Remove the rigid exhaust pipe section between converter and silencer (4a) and the relevant gaskets (4b). Refitting ( Removing ) 1. Refit in its seating the rigid exhaust pipe section between converter and silencer (1a) complete with gaskets (1b).2. Tighten the bolts securing the rigid exhaust pipe section between converter and silencer to the front silencer to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	RIGID EXHAUST PIPE	M8

3. Tighten the bolts securing the rigid exhaust pipe section between converter and silencer to the catalytic converter to the specified torque.

	Fastening	Component	Ø	Value(daNm)
3	Bolt	RIGID EXHAUST PIPE	M8	(Catalytic converter side) 2.3 ÷ 2.8

4. Tighten the bolt securing the collar supporting the rigid exhaust pipe section between converter and silencer to the relevant bracket. Proceed with refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Remove the car from the ramps.