125001141 - 1080E28 ENABLEMENT SOLENOID FOR FLOW OF FUEL VAPOUR TO INLET - R+R

Removing ( Refitting ) Position the vehicle on a lift.Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-)
DescriptionConnector
-Battery See A1B BATTERY ( BATTERY NEGATIVE )
Proceed with the removal    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Proceed with the removal    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with the removal    Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R.Proceed with the removal    Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R..Proceed with the removal    Op. 5530B10 BATTERY - R+R.Proceed with the removal    Op. 1072D10 MODULAR INLET MANIFOLD - R+R.1. Working at the bench, unscrew the bolts securing the solenoid enabling the passage of fuel vapours to the intake.2. Loosen the collars.3. Remove the solenoid enabling the passage of fuel vapours to the intake (3a) complete with pipe (3b).
Refitting ( Removing ) Refit the solenoid enabling the passage of fuel vapours to the intake with its pipe and tighten the bands.Working at the bench, unscrew the bolts securing the solenoid enabling the passage of fuel vapours to the intake.Proceed with the refitting    Op. 1072D10 MODULAR INLET MANIFOLD - R+R.Proceed with the refitting    Op. 5530B10 BATTERY - R+R.Proceed with the refitting    Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R..Proceed with the refitting    Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R.Proceed with the refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with the refitting    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Connect the negative battery terminal (-).Remove the vehicle from the lift.