125001144 - 1080E63 FUEL VAPOR HOSE BETWEEN RIGID PIPE AND CUT OFF SOLENOID R R

Removing ( Refitting ) Position the vehicle on a lift.Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-)
DescriptionConnector
-Battery See A1B BATTERY ( BATTERY NEGATIVE )
Proceed with the removal    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Proceed with the removal    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with the removal    Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R.Proceed with the removal    Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R..Proceed with the removal    Op. 5530B10 BATTERY - R+R.Proceed with the removal    Op. 1072D10 MODULAR INLET MANIFOLD - R+R.1. Unscrew the bolts securing the fuel vapour pipe from the intermediate junction to the solenoid, to the air capacity chamber.2. Release the fuel vapour pipe from the intermediate junction to the solenoid from its fastening.3. Unscrew the bolts securing the bracket for the solenoid enabling the passage of fuel vapours to the intake.4. Loosen collar (4a) and remove the fuel vapour pipe from the intermediate junction to the solenoid (4b).
Refitting ( Removing ) Refit the fuel vapour pipe from the intermediate junction to the solenoid and secure with a collar.Working at the bench, unscrew the bolts securing the solenoid enabling the passage of fuel vapours to the intake.Secure the fuel vapour pipe from the intermediate junction to the solenoid to its fastening.Tighten the bolts securing the fuel vapour pipe from the intermediate junction to the solenoid to the air capacity chamber.Proceed with the refitting    Op. 1072D10 MODULAR INLET MANIFOLD - R+R.Proceed with the refitting    Op. 5530B10 BATTERY - R+R.Proceed with the refitting    Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R..Proceed with the refitting    Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R.Proceed with the refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with the refitting    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Connect the negative battery terminal (-).Remove the vehicle from the lift.