125001185 - 1088D14 UPPER SLEEVE FOR COOLANT INLET TO RADIATOR - R + R

Removing ( Refitting ) Proceed with removal    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+RProceed with removal1. Disconnect the rapid connector (1a), loosen the band (1b) and remove the radiator upper coolant inlet hose (1c).    Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R.

Recover the coolant which comes out in a suitable container.

Refitting ( Removing ) Place the radiator upper coolant inlet hose back in its housing and fasten it using the band.Proceed with refitting    Op. 1048A59 PIPE from flow meter to throttle casing hose - R.R..Top up the engine cooling system    Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY.Proceed with refitting    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.