1092A10 CRANKSHAFT SERVICES PULLEY - R.R. - Alfa - GT - eLearn

) Position the vehicle on a lift.Proceed with the removal Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.1. Undo the bolts (1a) and the nut (1b) and remove the engine components single drive belt guard (1c).

Proceed with the removal Op. 4450B04 RIGHT FRONT WHEEL R R.Proceed with the removal Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with the removal Op. 7055B54 UNDER-ENGINE GUARD - R R.1. Adjust the mobile tensioner (1a) with a wrench and remove the engine components single drive belt (1b).

1. Undo the bolts (1a) and remove the guard (1b).2. Fit the flywheel lock.

	Description	Code
2	Counter-torque	1.860.898.000

1. Undo the bolts (1a) and remove the crankshaft pulley (1b).

) 1. Position the crankshaft pulley (1a) in its housing and secure it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	CRANKSHAFT PULLEY	M8	2.3 ÷ 2.8

Remove the flywheel lock.

	Description	Code
-	Counter-torque	1.860.898.000

Place the guard back in its housing and secure it using the bolts.Use a spanner in an anti-clockwise direction on the moving tensioner and fit the engine components single drive belt.Proceed with the refitting Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with the refitting Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with the refitting Op. 4450B04 RIGHT FRONT WHEEL R R.Place the engine components single drive belt guard in position and secure it using the nut and the bolts.Proceed with the refitting Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Remove the vehicle from the lift.