125001226 - 1820B38 CLUTCH HYDRAULIC ACTUATOR/OPERATING CYLINDER - R.R. AND BLEED AIR WITH CLUTCH REMOVED
Removing
(
Refitting
)
1. If necessary, undo the bolts (1a) and remove clutch hydraulic actuator (1b).
Refitting
(
Removing
)
Clean the mating surfaces between the clutch hydraulic actuator and the gearbox of sealant residues.Apply silicon sealant to the matching surfaces of the hydraulic clutch actuator and the gearbox.Place the hydraulic clutch actuator in position and secure it tightening the bolts to the recommended torque.
Removing
(
Refitting
)
1. If necessary, undo the bolts (1a) and remove clutch hydraulic actuator (1b).