125001273 - 2127A12 HAND LEVER OF MANUAL GEARBOX WITH HYDRAULIC SELECTION - R R (Smart gearbox)

Removing ( Refitting )

• Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 Battery

• Remove the trim on the tunnel cover.
•     Op. 7065C42 ASHTRAY (ONE) R+R
•     Op. 7040L37 GEAR LEVER PLATE - R R
• Release the electrical connection for the electro-hydraulic selection manual gearbox control lever from the fastening.

• Undo the bolts fixing the electro-hydraulic selection manual gearbox control lever.
• Remove the electro-hydraulic selection manual gearbox control lever (2a) after having disconnected the electrical connection (2b).

	Description	Connector
2b	Gear controls	See H37 GEAR CONTROLS

Refitting ( Removing )

• Connect the electrical connection, then place the electro-hydraulic selection manual gearbox control lever back in its housing and secure it using the bolts.
• Secure the electrical connection for the electro-hydraulic selection manual gearbox control lever using the fastening.
•     Op. 7040L37 GEAR LEVER PLATE - R R
•     Op. 7065C42 ASHTRAY (ONE) R+R
• Place the trim in its housing on the tunnel cover.
• Connect the negative battery terminal (-).