125001274 - 2127A16 PANEL OF CONTROL LEVER FOR MANUAL GEARBOX WITH HYDRAULIC SELECTION - R R (Smart gearbox)

Removing ( Refitting )

• Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 Battery

• Release the clips fastening the electro-hydraulic selection manual gearbox control lever trim.

• Release the electro-hydraulic selection manual gearbox control lever trim complete with lever.

1. Disconnect the electrical connection.

	Description	Connector
1	CITY function switch	See H39 CITY FUNCTION SWITCH

2. Disconnect the electrical connection.3. Disconnect the electrical connection.4. Remove the electro-hydraulic selection manual gearbox control lever trim (4a) complete with lever (4b).5. At the bench, undo the bolts (5a) and separate the electro-hydraulic selection manual gearbox control lever trim (5b) from the lever (5c).6. Undo the bolts (6a) and remove the CITY switch (6b) from the trim.7. Undo the bolts (7a) and remove the SPORT switch (7b) from the trim.8. Remove the trim LED. Refitting ( Removing )

• Place the trim LED back in its housing.
• Place the SPORT switch back in its housing and fasten it using the bolts.
• Place the CITY switch back in its housing and fasten it using the bolts.
• Assemble the electro-hydraulic selection manual gearbox control lever trim and the lever and secure them using the bolts.
• Connect the electrical connections.
• Place the electro-hydraulic selection manual gearbox control lever trim back in its housing complete with lever and secure them using the clips.
• Connect the negative battery terminal (-).