125001276 - 2127A30 HYDRAULIC GEARBOX GEAR SELECTION LEVER ON STEERING WHEEL ONE LH OR RH R R (Smart gearbox)

Removing ( Refitting )

Follow the safety instructions for this operation meticulously (see assembly 5580C AIR BAG SYSTEM).

  • PROCEED AS FOLLOWS FOR THE RIGHT LEVER.
1. Disconnect the electrical connection for the horn, then push the connector on the steering as far as possible to access the electrical wiring for the gear selector control lever.2. Disconnect the electrical connection for the gear selection control lever.
DescriptionConnector
2Gear controls on the steering wheel See H38 GEAR CONTROLS ON STEERING WHEEL
3. Undo the bolt (3a) and remove the gear selection control lever (3b) releasing the eletrical wiring.

  • PROCEED AS FOLLOWS FOR THE LEFT LEVER.
1. Disconnect the electrical connection for the gear selection control lever.
DescriptionConnector
1Gear controls on the steering wheel See H38 GEAR CONTROLS ON STEERING WHEEL
2. Undo the bolt (2a) and remove the gear selection control lever (2b) releasing the eletrical wiring.
Refitting ( Removing )

  • PROCEED AS FOLLOWS FOR THE LEFT LEVER.

  • Place the gear selection control lever back in its housing taking care to position the electrical wiring as illustrated in the diagram and secure it using the bolt.

  • Disconnect the electrical connection for the gear selection control lever.

  • PROCEED AS FOLLOWS FOR THE RIGHT LEVER.

  • Place the gear selection control lever back in its housing taking care to position the electrical wiring as illustrated in the diagram and secure it using the bolt.

  • Connect the electrical connection for the gear selection control lever.
  • Connect the electrical connection for the horn.