125001373 - 3340B52 PUMP/CENTRAL OBS PIPE - R R

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 4450B02 LEFT FRONT WHEEL R RRemove the protective cap on the brake caliper bleed valve.Connect the collection system (pipe and reservoir) to the bleed valve on the brake caliper.Loosen the bleed valve on the brake caliperOperate the brake pedal until the brake-clutch fluid reservoir is empty. Proceed with refitting    Op. 0010T64 BRAKE AND OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.Proceed with refitting    Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR.Proceed with refitting    Op. 4450B02 LEFT FRONT WHEEL R R.Remove the car from the ramps. 1. Undo the connectors (1a) and (1b) and remove the rigid pipe from the master cylinder to the ABS hydraulic unit (1c) after releasing it from the attachment (1d).
1. Place the rigid pipe from the master cylinder to the ABS hydraulic unit (1a) back in its seating, tighten the connectors (1b) and (1c) to the recommended torque and secure it with the attachment (1d).

FasteningComponentØValue(daNm)
1bConnectorPIPE FROM PUMP TO HYDRAULIC CONTROL UNITM12(Master cylinder side) 1.4 ÷ 1.8

FasteningComponentØValue(daNm)
1cConnectorPIPE FROM PUMP TO HYDRAULIC CONTROL UNITM12(A.B.S.) control unit side 1.4 ÷ 1.8