125001525 - 5040A40 AIR CONDITIONER CONDENSER - R+R
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	Observe the following precaution.
		)
	Observe the following precaution.|  | Follow the safety instructions ( Op. 5040 AIR CONDITIONING CASING AND COMPONENTS). | 

|  | Seal the disconnected connectors, using suitable plugs, to prevent humidity and impurities from entering the system. | 


 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Check that the condenser is intact and is not damaged and does not have deposits of dirt on the finned surface.Place the condenser and the duct in position together.Tighten the condenser fixing bolts.Tighten the bolts fixing the air duct to the radiator.
		)
	Check that the condenser is intact and is not damaged and does not have deposits of dirt on the finned surface.Place the condenser and the duct in position together.Tighten the condenser fixing bolts.Tighten the bolts fixing the air duct to the radiator.|  | Replace the O-rings for the connectors. Only use green coloured seals, resistant to R134A refrigerant. Lubricate the thread of the connectors using anti-freeze. | 
|  | Fastening | Component | Ø | Value(daNm) | 
|---|---|---|---|---|
| - | Bolt | COOLANT SYSTEM FITTINGS | M6 | 0.9 |