125001895 - 7040L37 GEAR LEVER PLATE - R R

Removing ( Refitting )

• Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 Battery

• Remove the trim on the tunnel cover.
•     Op. 7065C42 ASHTRAY (ONE) R+R
• Release the clips fastening the electro-hydraulic selection manual gearbox control lever trim.

• Release the electro-hydraulic selection manual gearbox control lever trim complete with lever.

1. Disconnect the electrical connection.

	Description	Connector
1	CITY function switch	See H39 CITY FUNCTION SWITCH

2. Disconnect the electrical connection.3. Disconnect the electrical connection.4. Remove the electro-hydraulic selection manual gearbox control lever trim (4a) complete with lever (4b).

• Undo the bolts (1a) and remove the gear lever surrounding trim (1b).

Refitting ( Removing )

• Place thegear lever surrounding trim in its housing and secure it using the bolts.
• Connect the electrical connections.
• Place the electro-hydraulic selection manual gearbox control lever trim back in its housing complete with lever and secure them using the clips.
•     Op. 7065C42 ASHTRAY (ONE) R+R
• Place the trim in its housing on the tunnel cover.
• Connect the negative battery terminal (-).