125001913 - 7045A72 FRONT SEAT MOUNT/GUIDE - PASSENGER`S SIDE R R WITH SEAT REMOVED
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	     Op. 7045A24 SQUAB KNOB - R R     Op. 7045A43 SEAT EXTERIOR GUARD - R R     Op. 7045A44 SEAT INTERIOR GUARD - R R1. Disconnect the side air bag wiring retaining band.2. Release the retainer (2a) and rotate the connector carrier bracket (2b) into an accessible position.3. Release the connector for the heat pad (3a) and the connector for the side Air Bag (3b) from the rail-type retainers.4. Disconnect the wiring from the retainer.5. Undo the cushion bolts.
		)
	     Op. 7045A24 SQUAB KNOB - R R     Op. 7045A43 SEAT EXTERIOR GUARD - R R     Op. 7045A44 SEAT INTERIOR GUARD - R R1. Disconnect the side air bag wiring retaining band.2. Release the retainer (2a) and rotate the connector carrier bracket (2b) into an accessible position.3. Release the connector for the heat pad (3a) and the connector for the side Air Bag (3b) from the rail-type retainers.4. Disconnect the wiring from the retainer.5. Undo the cushion bolts.



 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Check that the passenger front seat support is not damaged.If removed,     Op. 7065A14 ANCHORAGE ROD FOR , (ONE), FRONT SEAT BELT LEFT OR RIGHT - R.R.If removed,     Op. 7045A70 FRONT SEAT SUPPORT/GUIDE - DRIVER`S SIDE WITH LIFT DEVICE - R R WITH SEAT REMOVEDPosition the backrest on the passenger front seat support and secure it using the bolts.Connect the end of the seat slide position memory control cable.Position the cushion.Connect the squab heat pad electrical connection.Hook the two bottom ends of the squab cover to each other.Tighten the cushion retaining boltsConnect the wiring to the retainer.Do up the heat pad connectorand side air bag connector to their rail-type retainers.Turn the connector carrier bracket in its seat and engage its retainer.Connect the side bag wiring retaining band.     Op. 7045A44 SEAT INTERIOR GUARD - R R     Op. 7045A43 SEAT EXTERIOR GUARD - R R     Op. 7045A24 SQUAB KNOB - R R
		)
	Check that the passenger front seat support is not damaged.If removed,     Op. 7065A14 ANCHORAGE ROD FOR , (ONE), FRONT SEAT BELT LEFT OR RIGHT - R.R.If removed,     Op. 7045A70 FRONT SEAT SUPPORT/GUIDE - DRIVER`S SIDE WITH LIFT DEVICE - R R WITH SEAT REMOVEDPosition the backrest on the passenger front seat support and secure it using the bolts.Connect the end of the seat slide position memory control cable.Position the cushion.Connect the squab heat pad electrical connection.Hook the two bottom ends of the squab cover to each other.Tighten the cushion retaining boltsConnect the wiring to the retainer.Do up the heat pad connectorand side air bag connector to their rail-type retainers.Turn the connector carrier bracket in its seat and engage its retainer.Connect the side bag wiring retaining band.     Op. 7045A44 SEAT INTERIOR GUARD - R R     Op. 7045A43 SEAT EXTERIOR GUARD - R R     Op. 7045A24 SQUAB KNOB - R R