1056F50 ENGINE COOLANT TEMPERATURE SENSOR - R.R. - Alfa - GT - eLearn

2923157 - 1056F50 Engine coolant temperature SENSOR - R.R.

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 1016A40 ignition coil cover on cylinder head- r+r Proceed with removal - 1048A59 PIPE from flow meter to throttle casing hose - R.R. 1. Disconnect the electrical connection from the engine coolant temperature sensor.

	Name	Connector
1	Engine temperature sender unit	K36

2. Undo and remove the engine coolant temperature sensor.

Refitting ( Removing

) Place the engine coolant temperature sensor back in its housing and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	ENGINE COOLANT (MPI TEMPERATURE SENSOR)	M12	(Thermostat side) 2.7 ÷ 3.3

Connect the electrical connection to the engine coolant temperature sensor. Proceed with refitting - 1048A59 PIPE from flow meter to throttle casing hose - R.R. . Proceed with refitting - 1016A40 ignition coil cover on cylinder head- r+r . Connect the negative (-) battery terminal