125000858 - 0510C20 LUBRICATION SYSTEM - CHECK DELIVERY PRESSURE

Let the engine warm up (engine oil temperature (~ 90°C).Proceed with the removal    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with the removal    Op. 1084B30 ENGINE OIL FILTER R R.Proceed with the removal    Op. 1084A42 ENGINE OIL TEMPERATURE SENDER UNIT - R + R.1. Fit the insufficient engine oil pressure warning light switch in the housing.
DescriptionCode
1Connector1.860.969.000
2. Fit the pressure gauge.Temporarily fit the engine oil filter.Start up the engine only for long enough to check that the engine oil pressure is within the recommended values.
MeasurementValue
-Engine oil pressure at idle speed (bar)0.8
MeasurementValue
-Engine oil pressure at 4000 rpm (bar)4.5
Remove the engine oil filterRemove the pressure gauge.Remove the tool.
DescriptionCode
-Connector1.860.969.000
Proceed with the refitting    Op. 1084A42 ENGINE OIL TEMPERATURE SENDER UNIT - R + R.Proceed with the refitting    Op. 1084B30 ENGINE OIL FILTER R R.Proceed with the refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.