125001422 - 4130B82 RETURN PIPE BETWEEN RIGID INTERMEDIATE RETURN PIPE TO FLUID RESEVIOR R R

Removing ( Refitting ) Proceed with removal    Op. 5530B10 BATTERY - R+RProceed with removalDrain the power steering fluid from the reservoir using a suitable syringe.    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.1. Loosen the bands and disconnect the return pipe between rigid intermediate return pipe to fluid reservoir, reservoir side.
Refitting ( Removing ) Refit the return pipe between rigid intermediate return pipe to fluid reservoir, connect it to the reservoir and tighten the band.Proceed with refitting    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with refitting    Op. 5530B10 BATTERY - R+R.Fill the power steering circuit with the recommended fluid.

TypeComponentNameQty.
-Fluid [l]HYDRAULIC POWER ASSISTED STEERING SYSTEMTUTELA GI/A1.2
The table shows the total quantity of fluid present in the power assisted steering circuit.
Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times.Check and, if necessary, top up the fluid level in the reservoir.With the wheels on the ground, start the engine and turn the steering wheel to full lock, left and right, 4 - 5 times.Top up the fluid level in the reservoir.