125001424 - 4130B99 RETURN PIPE FROM POWER STEERING CASE TO POWER STEERING FLUID RESEVIOR R R

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 7055B54 UNDER-ENGINE GUARD - R RProceed with removalProceed with removal    Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R RProceed with removalRemove the power steering fluid cooling radiator air duct from its seating.    Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R RProceed with removal1. Undo the nuts (1a) and remove the mounting bracket for the power assisted steering fluid radiator (1b).    Op. 7210E10 R.R. FRONT BUMPER    Op. 4130B98 RADIATORE RAFFREDDAMENTO LIQUIDO SERVOSTERZO - S.R.
Refitting ( Removing ) Place the power assisted steering fluid radiator mounting bracket in its housing and secure it using the nuts.Proceed with refitting    Op. 4130B98 RADIATORE RAFFREDDAMENTO LIQUIDO SERVOSTERZO - S.R..Refit the power steering fluidl cooling radiator duct in its seating.Proceed with refitting    Op. 7210E10 R.R. FRONT BUMPER.Proceed with refitting    Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.Proceed with refitting    Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.Proceed with refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Fill the power steering circuit with the recommended fluid.

TypeComponentNameQty.
-Fluid [l]HYDRAULIC POWER ASSISTED STEERING SYSTEMTUTELA GI/A1.2
The table shows the total quantity of fluid present in the power assisted steering circuit.
Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times.Check and, if necessary, top up the fluid level in the reservoir.Remove the car from the ramps.Start the engine and carry out 4 - 5 full steering wheel turn cycles (right and left).Top up the fluid level in the reservoir.