125001670 - 5540C40 MOTOR (1), LH OR RH, FOR CORRECTING/ALIGNING GAS DISCHARGE LIGHT UNIT R R

Removing ( Refitting )     Op. 5540B74 LEFT FRONT LIGHT CLUSTER WITH FOGLAMP R R(on the left light cluster)    Op. 5540B75 RIGHT FRONT LIGHT CLUSTER WITH FOGLAMP R R(on the right light cluster)    Op. 5540B76 FRONT LIGHT CLUSTER WITH FOGLAMP ONE LH OR RH R R WITH INTERFERING PARTS REMOVED1. Undo the fixing bolts (1a) and remove the protective bulb cover (1b). 1. Undo the motor fixing bolt.2. Disconnect the motor shaft (2a) from the retainer (2b).3. Move the motor slightly and disconnect the electrical connection.4. Recover the motor. Refitting ( Removing ) Check that the motor is undamaged, and if necessary conduct an electrical test on it.Connect the electrical connection.Connect the motor shaft to the retainer.Position the motor and secure it using the bolt.Place the protective bulb cover in position and secure it using the bolts.    Op. 5540B76 FRONT LIGHT CLUSTER WITH FOGLAMP ONE LH OR RH R R WITH INTERFERING PARTS REMOVED    Op. 5540B75 RIGHT FRONT LIGHT CLUSTER WITH FOGLAMP R R(on the right light cluster)    Op. 5540B74 LEFT FRONT LIGHT CLUSTER WITH FOGLAMP R R(on the left light cluster)