125001796 - 7005M40 FRONT ELECTRIC WINDOW SYSTEM ECU - R+R FOLLOWING ELECTRICAL WIRING CHECK

Removing ( Refitting )     Op. 7005E12 CORNER COVER OF ONE FRONT SIDE DOOR, LH OR RH R R    Op. 7005C44 INTERIOR HANDLE PANEL - R R    Op. 7005M14 SWITCH UNIT CONTROLLING ELECTRIC WINDOWS REAR VIEW MIRRORS AND DOOR LOCK ON DRIVERS SIDE FRONT DOOR R R(for driver''s door)    Op. 7005M12 PASSENGER SIDE FRONT DOOR ELECTRICALLY OPERATED WINDOW SWITCH - R R(for passenger door)    Op. 7005E08 FRONT SIDE DOOR INTERIOR PANEL R R1. Disconnect the electrical connections (1a) and (1b) for the window opening control unit.
NameConnector
1aDriver''s electric window control unit See M116A DRIVER''S ELECTRIC WINDOW CONTROL UNIT ( CONNECTORS )
NameConnector
1bDriver''s electric window control unit See M116B DRIVER''S ELECTRIC WINDOW CONTROL UNIT ( CONNECTORS )
NameConnector
1aPassenger side electric window control unit See M117A PASSENGER SIDE ELECTRIC WINDOW CONTROL UNIT ( CONNECTORS )
NameConnector
1bPassenger side electric window control unit See M117B PASSENGER SIDE ELECTRIC WINDOW CONTROL UNIT ( CONNECTORS )
2. Undo the fixing bolts (2a) and remove the window opening control unit (2b).
Refitting ( Removing ) Check that the window opening control unit is not damaged.Position the window opening control unit and secure it using the fixing bolts.Connect the electrical connections .
NameConnector
-Driver''s electric window control unit See M116A DRIVER''S ELECTRIC WINDOW CONTROL UNIT ( CONNECTORS )
NameConnector
-Driver''s electric window control unit See M116B DRIVER''S ELECTRIC WINDOW CONTROL UNIT ( CONNECTORS )
NameConnector
-Passenger side electric window control unit See M117A PASSENGER SIDE ELECTRIC WINDOW CONTROL UNIT ( CONNECTORS )
NameConnector
-Passenger side electric window control unit See M117B PASSENGER SIDE ELECTRIC WINDOW CONTROL UNIT ( CONNECTORS )
    Op. 7005E08 FRONT SIDE DOOR INTERIOR PANEL R R    Op. 7005M12 PASSENGER SIDE FRONT DOOR ELECTRICALLY OPERATED WINDOW SWITCH - R R(for passenger door)    Op. 7005M14 SWITCH UNIT CONTROLLING ELECTRIC WINDOWS REAR VIEW MIRRORS AND DOOR LOCK ON DRIVERS SIDE FRONT DOOR R R(for driver''s door)    Op. 7005C44 INTERIOR HANDLE PANEL - R R    Op. 7005E12 CORNER COVER OF ONE FRONT SIDE DOOR, LH OR RH R RProgramme the end of travel for the window opening control unit following the instructions given below.Get inside the vehicle and close the door.Turn the ignition ON and, using the switch for the electric window involved, place the window in the ''fully lowered'' position and keep the switch pressed for 10 seconds.Still using the switch, place the window in the ''fully raised'' position and keep the same switch pressed for 10 seconds.The window offset for the up and down function is programmed in the control unit starting from the ''fully raised'' position memorized previously.
The procedure described above for programming the electric window control unit end of travel, should be carried out each time the battery leads are disconnected.