125000843 - 0010T62 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY

Position the vehicle on a lift.1. Remove the protective cap from the bleed valve on one brake caliper.2. Connect the recovery device (pipe and reservoir) to the bleed valve on the brake calliper.3. Open the bleed valve on the brake caliper.Operate the brake pedal until all the fluid emerges.Repeat the operations described above for the remaining brake calipers.
Proceed with the removal    Op. 5530B10 BATTERY - R+RProceed with the removal    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..1. Remove protective cap (1a) and connect recovery device (1b) to the clutch slave cylinder bleed fitting.2. Open the bleed valve on the clutch slave cylinder.Operate the clutch pedal until the circuit is completely empty.
1. Cnnect the tool to the brake/clutch fluid reservoir.
DescriptionCode
1Brake - clutch bleed equipment1.806.097.001
2. Slowly open the device reservoir cock and refill the brake/clutch systems with the recommended fluid.
TypeComponentDescriptionQty.
2Fluid [I]BRAKE-CLUTCH HYDRAULIC SYSTEMTUTELA CAR TOP 4 FOR ALFA ROMEO0.52
Wait for all the air in the hydraulic brake-clutch system to escape.Close the bleed valves on the brake callipers and refit the protective plugs in their seats.Close the bleed valve on the clutch slave cylinder and refit the protective cap in its seat.Remove the fluid recovery devices.Remove the equipment.
DescriptionCode
-Brake - clutch bleed equipment1.806.097.001
Proceed with the refitting    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with the refitting    Op. 5530B10 BATTERY - R+RRemove the vehicle from the lift.Check that the clutch disengages properly and that the gears engage and that the brake system is efficient.