1008A44 REAR RIGID MOUNT - R R - Alfa - GT - eLearn

125000877 - 1008A44 REAR RIGID MOUNT - R R

) Position the vehicle on a lift.Proceed with the removal Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with the removal Op. 1076B82 LEFT EXHASUST PIPE BETWEEN CATALYTIC PRECONVERTER AND CONVERTER R R.1. Position a hydraulic jack beneath the gearbox.2. Unscrew the bolt securing the power unit rigid rear support to the flexible mounting.3. Undo the bolts (3a) and remove the power unit rear support (3b).

Refitting ( Removing

) 1. Place the power unit rigid rear support (1a) in its housing and secure it to the differential tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	RIGID REAR SUPPORT POWER UNIT	M16	(Manual gearbox/differential side) 10.8 - 13.2

2. Tighten the bolt securing the power unit side rigid rear support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	-	-	-	-

3. Remove the hydraulic jack from beneath the gearbox

Proceed with the refitting Op. 1076B82 LEFT EXHASUST PIPE BETWEEN CATALYTIC PRECONVERTER AND CONVERTER R R.Proceed with the refitting Op. 7055B54 UNDER-ENGINE GUARD - R R.Remove the vehicle from the lift.