1008B20 POWER UNIT INTERMEDIATE MOUNT FLEXIBLE BLOCK - REPLACE - Alfa - GT - eLearn

125000881 - 1008B20 POWER UNIT INTERMEDIATE MOUNT FLEXIBLE BLOCK - REPLACE

) Position the vehicle on a lift.Proceed with the removal Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with the removal Op. 1076B82 LEFT EXHASUST PIPE BETWEEN CATALYTIC PRECONVERTER AND CONVERTER R R.Proceed with the removal Op. 1008A44 REAR RIGID MOUNT - R R.1. Undo the nuts (1a) and remove the heat shield (1b).2. Undo the bolts (2a) and remove the flexible mounting for the power unit rear support (2b).

Refitting ( Removing

) 1. Place the power unit rear support flexible mounting (1a) in its housing and secure it to the crossmember tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	INTERM RUBBER MOUNT	M8	(Front suspension crossmember side) 3.3 - 3.9

2. Place the heat shield (2a) in its housing and secure it using the nuts.

Proceed with the refitting Op. 1008A44 REAR RIGID MOUNT - R R.Proceed with the refitting Op. 1076B82 LEFT EXHASUST PIPE BETWEEN CATALYTIC PRECONVERTER AND CONVERTER R R.Proceed with the refitting Op. 7055B54 UNDER-ENGINE GUARD - R R.Remove the vehicle from the lift.