125000886 - 1008C16 BODY LINK BRACKET - R R

Removing ( Refitting ) Proceed with removal    Op. 1008C10 POWER UNIT UPPER REACTION LINK R R.1. Undo the nuts (1a) and remove the upper bracket on the bodyshell for the reaction rod (1b).
The above mentioned nuts also fix the right front shock absorber to the bodyshell.
2. Undo the nut (2a) and remove the mounting bracket for the wheel rpm sensor connection and fuel pipes (2b).3. Undo the nut (3a) and the bolt (3b) and remove the lower bracket on the bodyhsell for the reaction rod (3c).
Refitting ( Removing ) 1. Place the lower bracket on the bodyshell for the reaction rod (1a) back in its housing and secure it by tightening the bolt (1b) and the nut (1c) to the recommended torque.

FasteningComponentØValue(daNm)
1bBoltREACTION ROD LOWER MOUNTING BRACKETM8(Bodyshell side) 2.2 ÷ 2.6

FasteningComponentØValue(daNm)
1cNutREACTION ROD LOWER MOUNTING BRACKETM8(Bodyshell side) 2.2 ÷ 2.6
2. Place the mounting bracket (2a) for the wheel rpm sensor connection and fuel pipe back in its housing, then secure it using the nut (2b).3. Place the upper bracket on the bodyshell for the reaction rod (3a) back in its housing and secure it by tightening the nuts (3b) to the recommended torque.

FasteningComponentØValue(daNm)
3bNutREACTION ROD UPPER MOUNTING BRACKETM8(Bodyshell side) 2.2 ÷ 2.6
The above mentioned nuts also fix the right front shock absorber to the bodyshell.
Proceed with refitting    Op. 1008C10 POWER UNIT UPPER REACTION LINK R R.