125000893 - 1016A34 RIGHT-HAND CAM COVER - R + R AND REPLACE GASKET

Removing ( Refitting ) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with removal    Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R.Proceed with removal    Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R.1. Undo the bolts (1a) and remove the right tappet cover (1b) complete with gasket. Refitting ( Removing ) 1. Place the right tappet cover (1a), complete with gasket, back in its housing and secure it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	CAM COVERS	M7	(Cylinder head side) 1.4 ÷ 1.7

Proceed with refitting    Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R.Proceed with refitting    Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R.Connect the negative (-) battery terminal.