125000944 - 1024B40 FLYWHEEL CROWN WHEEL - REPLACEMENT FOR VERSIONS WITH MANUAL GEARBOX
Removing
(
Refitting
)
Remove the ring gear from the engine flywheel using a hydraulic press.
Refitting
(
Removing
)
Thoroughly clean and degrease the contact surfaces of the new ring gear and the flywheel.Heat up the new ring gear evenly in an oven at a temperature of 80°C.Fit the ring gear on the flywheel. | The bevel on the inner diameter of the ring gear must face the flywheel. |
| Leave to cool to ambient temperature without cooling forcibly. |