Removing
(
Refitting
)
1. Remove the circlips.2. Remove the pin (2a) and separate the connecting rod (2b) from the piston (2c).
Refitting
(
Removing
)
1. Join the connecting rod to the piston so that:for the left bank, arrow (1a) stamped on the piston is turned toward the same side as the stamp (1b) on the connecting rod;for the right bank, arrow (1c) stamped on the piston is turned towards the opposite side to the stamp on the connecting rod.Refit the pin and secure using piston rings.
Removing
(
Refitting
)
1. Remove the circlips.2. Remove the pin (2a) and separate the connecting rod (2b) from the piston (2c).
