125000968 - 1032B58 RIGHT CYLINDER HEAD DRIVEN TOOTHED PULLEYS - R.R.

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 4450B04 RIGHT FRONT WHEEL R RProceed with removalProceed with removal    Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R RProceed with removalProceed with removal    Op. 1092G10 SINGLE ENGINE BELT R RProceed with removalProceed with removal    Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R.Proceed with removalProceed with removal    Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + RProceed with removalProceed with removal    Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+RProceed with removal1. Undo the bolts (1a) fixing the driven pullies using the tool (1b) for counter-torque.    Op. 5510C16 LEFT HAND CYLINDER HEAD IGNITION COIL - R+R    Op. 1016A30 LEFT CAM COVER - R + R AND REPLACE GASKET    Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R    Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R    Op. 1016A34 RIGHT-HAND CAM COVER - R + R AND REPLACE GASKET    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

NameCountry
1bCounter-torque1.822.146.000
1. Remove the driven pullies (1a) using the tool (1b).

NameCountry
1bExtractor1.860.954.001
Refitting ( Removing ) Place the driven toothed pullies back in their housings and secure them without tightening the bolts.Proceed with refitting    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.Proceed with refitting    Op. 1016A34 RIGHT-HAND CAM COVER - R + R AND REPLACE GASKET.Proceed with refitting    Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R.Proceed with refitting    Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R.Proceed with refitting    Op. 1016A30 LEFT CAM COVER - R + R AND REPLACE GASKET.Proceed with refitting    Op. 5510C16 LEFT HAND CYLINDER HEAD IGNITION COIL - R+R.Proceed with refitting    Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+R.Proceed with refitting    Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.Proceed with refitting    Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..Proceed with refitting    Op. 1092G10 SINGLE ENGINE BELT R R.Proceed with refitting    Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.Proceed with refitting    Op. 4450B04 RIGHT FRONT WHEEL R R.Remove the car from the ramps.