125000973 - 1032C32 FIXED TIMING SYSTEM TENSIONER (ONE) R + R
Removing
(
Refitting
)
Position the vehicle on a lift.Proceed with the removal Op. 4450B04 RIGHT FRONT WHEEL R R.Proceed with the removal Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.Proceed with the removal Op. 1092G10 SINGLE ENGINE BELT R R.Proceed with the removal Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..Proceed with the removal Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.Proceed with the removal Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+R.Proceed with the removal Op. 5510C16 LEFT HAND CYLINDER HEAD IGNITION COIL - R+R.Proceed with the removal Op. 1016A30 LEFT CAM COVER - R + R AND REPLACE GASKET.Proceed with the removal Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R.Proceed with the removal Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R.Proceed with the removal Op. 1016A34 RIGHT-HAND CAM COVER - R + R AND REPLACE GASKET.Proceed with the removal Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.PROCEED AS FOLLOWS FOR THE UPPER FIXED TIMING TENSIONER.1. Undo the bolt (1a) and remove the upper fixed timing tensioner (1b).PROCEED AS FOLLOWS FOR THE LOWER FIXED TIMING TENSIONER.2. Undo the bolt (2a) and remove the lower fixed timing tensioner (2b).
Refitting
(
Removing
)
Position the fixed timing tensioner in its housing and secure it tightening the bolt to the recommended torque.| Fastening | Component | Ø | Value(daNm) | |
|---|---|---|---|---|
| - | Bolt | FIXED TENSIONER | M10 | (Cylinder head side) 4.5 - 5.5 |