125000991 - 1036E58 FRONT OIL SEAL OF R/H OVERHEAD CAMSHAFTS - REPLACE

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 4450B04 RIGHT FRONT WHEEL R RProceed with removalProceed with removal    Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R RProceed with removalProceed with removal    Op. 1092G10 SINGLE ENGINE BELT R RProceed with removalProceed with removal    Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R.Proceed with removalProceed with removal    Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + RProceed with removalProceed with removal    Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+RProceed with removalProceed with removal    Op. 5510C16 LEFT HAND CYLINDER HEAD IGNITION COIL - R+RProceed with removal1. Undo the bolts (1a) and remove the right cylinder head camshaft front caps (1b).    Op. 1016A30 LEFT CAM COVER - R + R AND REPLACE GASKET2. Release and remove the oil seals for the right cylinder head camshafts.    Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R    Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R    Op. 1016A34 RIGHT-HAND CAM COVER - R + R AND REPLACE GASKET    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT    Op. 1032B58 RIGHT CYLINDER HEAD DRIVEN TOOTHED PULLEYS - R.R.    Op. 1008C14 ENGINE LINK BRACKET - R R
Refitting ( Removing ) Place the camshaft front caps back in their housings in the right cylinder head following the sequence shown in the diagram.
Tighten the bolts fixing the right cylinder head camshaft front caps to the recommended torque.

FasteningComponentØValue(daNm)
-BoltCAMSHAFT CAPS/M8(Cylinder head side) 1.8 ÷ 2.0
1. Fit the camshaft front oil seals (1a) using the tool (1b).

NameCountry
1bFitting tool1.860.948.000
Proceed with refitting    Op. 1008C14 ENGINE LINK BRACKET - R R.Proceed with refitting    Op. 1032B58 RIGHT CYLINDER HEAD DRIVEN TOOTHED PULLEYS - R.R..Proceed with refitting    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.Proceed with refitting    Op. 1016A34 RIGHT-HAND CAM COVER - R + R AND REPLACE GASKET.Proceed with refitting    Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R.Proceed with refitting    Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R.Proceed with refitting    Op. 1016A30 LEFT CAM COVER - R + R AND REPLACE GASKET.Proceed with refitting    Op. 5510C16 LEFT HAND CYLINDER HEAD IGNITION COIL - R+R.Proceed with refitting    Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+R.Proceed with refitting    Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.Proceed with refitting    Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..Proceed with refitting    Op. 1092G10 SINGLE ENGINE BELT R R.Proceed with refitting    Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.Proceed with refitting    Op. 4450B04 RIGHT FRONT WHEEL R R.Remove the car from the ramps.