1048A14 AIR CLEANER FILTERING ELEMENT - REPLACE. - Alfa - GT - eLearn

125001016 - 1048A14 AIR CLEANER FILTERING ELEMENT - REPLACE.

) Proceed with removal Op. 1048A28 VACUUM AIR CIRCUIT RESONATOR PIPE - R+R1. Undo the nuts (1a) and move the relays (1b) sideways.2. Disconnect the electrical connection from the air flow meter.3. Undo the bolts (3a) and remove the air filter cover (3b) complete with air flow meter (3c).

	Name	Connector
2	Air flow meter	See K41 AIR FLOW METER ( FRONT )

1. Remove the air filter filter element.

Refitting ( Removing

) .

Before fitting a new filter element, remove any impurities in the filter casing (by suction) that could fall into the clean air section of the circuit. Take care to position the filter element correctly so that the gasket is in its housing and is not cut or damaged.

Place a new filter element for the air filter back in the housing.Place the air filter cover, complete with air flow meter and secure it using the bolts.Connect the electrical connection to the air flow meter.Place the relays in their housings and secure them using the nuts.Proceed with refitting Op. 1048A28 VACUUM AIR CIRCUIT RESONATOR PIPE - R+R.