125001076 - 1072B12 INTAKE MANIFOLD (ONE) LH OR RH - R R AND REPLACE GASKET

Removing ( Refitting ) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with removal    Op. 1072B42 LEFT HAND OR RIGHT HAND INLET MANIFOLD (ONE) - R+RProceed with removal1. Undo the bolts (1a) and remove the relevant inlet manifold (1b). 1056B62 l/h and r/h fuel pipe assembly - with injectors - r + rRemove the gasket. Refitting ( Removing ) Place the intake manifold complete with gasket back in its housing and secure it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	INLET MANIFOLD	M8	(Cylinder head side) 1.9 ÷ 2.3

Proceed with refitting 1056B62 l/h and r/h fuel pipe assembly - with injectors - r + r.Proceed with refitting    Op. 1072B42 LEFT HAND OR RIGHT HAND INLET MANIFOLD (ONE) - R+R.Connect the negative (-) battery terminal