1076A70 HEAT SHIELD FOR LEFT CATALYTIC PRECONVERTER R R - Alfa - GT - eLearn

125001094 - 1076A70 HEAT SHIELD FOR LEFT CATALYTIC PRECONVERTER R R

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with removal Op. 7055B54 UNDER-ENGINE GUARD - R RProceed with removal1. Undo the bolt (1a) and the nuts (1b) and remove the heat shield for the left catalytic preconverter (1c). Op. 1080B92 LEFT UPPER LAMBDA SENSOR R R

Refitting ( Removing

) Place the heat shield for the left catalytic preconverter back in its housing, then fasten it using the bolt and the nuts.Proceed with refitting Op. 1080B92 LEFT UPPER LAMBDA SENSOR R R.Proceed with refitting Op. 7055B54 UNDER-ENGINE GUARD - R R.Connect the negative (-) battery terminalRemove the car from the ramps.