125001140 - 1080E20 ACTIVE CARBON FILTER FOR FUEL VAPOURS - R + R

Removing ( Refitting ) .
The activated carbon filter is supplied together with the solenoid enabling the passage of fuel vapours to the intake and the connection pipes and they cannot therefore be broken down individually.
Position the vehicle on a lift.Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).
DescriptionConnector
-Battery See A1B BATTERY ( BATTERY NEGATIVE )
1. Disconnect the quick-release connectors for the fuel vapour pipes.
Proceed with the removal    Op. 4450B04 RIGHT FRONT WHEEL R R.Proceed with the removal    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with the removal    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..1. Disconnect the electrical connection from the fuel vapour enablement solenoid valve.
DescriptionConnector
1Fuel vapour recovery solenoid valve See L10 FUEL VAPOUR RECOVERY SOLENOID
2. Undo the nuts (2a) and remove the fuel vapour active charcoal filter (2b) complete with intake fuel vapour enablement solenoid valve (2c) and piping (2d).
Refitting ( Removing ) Place the fuel vapour active charcoal filter in its housing complete with intake fuel vapour enablement solenoid and piping, then secure it using the nuts.Connect the electrical connection for the fuel vapour enablement solenoid valve.Proceed with the refitting    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..Proceed with the refitting    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with the refitting    Op. 4450B04 RIGHT FRONT WHEEL R R.Connect the quick-release connectors for the fuel vapour pipes.Connect the negative battery terminal (-).Remove the vehicle from the lift.