125001151 - 1084A42 ENGINE OIL TEMPERATURE SENDER UNIT - R + R

Removing ( Refitting ) Position the vehicle on a lift.Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Description	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with the removal    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with the removal    Op. 1084B30 ENGINE OIL FILTER R R.1. Disconnect the electrical connection from the engine oil pressure warning light switch.

	Description	Connector
1	Engine oil pressure sensor (switch)	See K30 ENGINE OIL PRESSURE SENSOR SWITCH ( CONNECTORS )

2. Undo and remove the engine oil pressure warning light switch. Refitting ( Removing ) Place the engine oil pressure warning light switch in its housing and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	INSUFFICIENT ENGINE OIL PRESSURE SWITCH	M14	2.2 ÷ 2.6

Connect the electrical connection to the engine oil pressure warning light switch.Proceed with the refitting    Op. 1084B30 ENGINE OIL FILTER R R.Connect the negative battery terminal (-).Refill the engine oil lubrication system    Op. 0010T11 ENGINE OIL CHECK LEVEL AND TOP UP.Proceed with the refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Remove the vehicle from the lift.