125001152 - 1084A46 ENGINE OIL TEMPERATURE SENDER UNIT - R + R

Removing ( Refitting ) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with removal    Op. 4450B04 RIGHT FRONT WHEEL R RProceed with removal1. Disconnect the electrical connection from the engine oil temperature sender unit.    Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R2. Undo and remove the engine oil temperature sender unit. Refitting ( Removing ) Place the engine oil temperature sender unit in its seating and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

Connect the electrical connection to the engine oil temperature sender unit.Proceed with refitting    Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.Proceed with refitting    Op. 4450B04 RIGHT FRONT WHEEL R R.Connect the negative (-) battery terminalRemove the car from the ramps.