1084C36 ENGINE OIL COOLING RADIATOR SUPPORT BRACKET - R + R - Alfa - GT - eLearn

125001168 - 1084C36 ENGINE OIL COOLING RADIATOR SUPPORT BRACKET - R + R

) Position the vehicle on the rampProceed with removal Op. 7055B54 UNDER-ENGINE GUARD - R RProceed with removalProceed with removal Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R RProceed with removalProceed with removal Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R1. Undo the nuts (1a) and move the engine oil cooling radiator (1b) without disconnecting the pipes. Op. 7210E10 R.R. FRONT BUMPER Op. 1084C40 CONVOGLIATORE ARIA PER RADIATORE RAFFREDDAMENTO OLIO MOTORE - S.R.

1. Position a hydraulic jack under the rigid power unit support, timing side.2. Undo the nut fixing the timing side rigid engine support to the flexible mounting.Lower the hydraulic jack as necessary.3. Undo the bolts (3a) and remove the flexible block for the propulsion unit front support.

1. Keep the engine oil cooling radiator mounting bracket.

Refitting ( Removing

) Place the engine oil cooling radiator mounting bracket back in its housing.1. Place the flexible mounting for the power unit front support (1a) back in its housing and secure it by tightening the bolts (1b) to the recommended torque.

The bolts fixing the flexible mounting to the bodyshell also secure the engine oil cooling radiator mounting bracket.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT RUBBER MOUNTS	M8	(Bodyshell side) 3.2 ÷ 3.9

Place the timing side rigid engine support in contact with the flexible mounting using the hydraulic jack.2. Tighten the nut securing the timing side rigid engine support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Nut	ENGINE MOUNT TIMING SIDE	M10	(Flexible mounting side) 4.5 ÷ 5.5

3. Remove the hydraulic jack.

Place the engine oil cooling radiator back in its housing and fix it using the nuts.Proceed with refitting Op. 1084C40 CONVOGLIATORE ARIA PER RADIATORE RAFFREDDAMENTO OLIO MOTORE - S.R..Proceed with refitting Op. 7210E10 R.R. FRONT BUMPER.Proceed with refitting Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.Proceed with refitting Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.Proceed with refitting Op. 7055B54 UNDER-ENGINE GUARD - R R.Remove the car from the ramps.