1084C38 ENGINE OIL DELIVERY AND RETURN PIPES TO COOLING RADIATOR - R + R - Alfa - GT - eLearn

125001169 - 1084C38 ENGINE OIL DELIVERY AND RETURN PIPES TO COOLING RADIATOR - R + R

) Position the vehicle on the rampProceed with removal Op. 7055B54 UNDER-ENGINE GUARD - R R1. Undo the bolts (1a) and disconnect the engine oil supply and return pipes to the cooling radiator (1b), radiator side.

Recover the engine oil which comes out in a suitable container.

1. Undo the nut (1a) and remove the engine oil/power assisted steering fluid pipes lower mounting bracket (1b).

1. Undo the nut (1a) and remove the engine oil/power assisted steering fluid pipes lower mounting bracket (1b).2. Undo the nut (1a) and remove the engine oil/power assisted steering fluid pipes upper mounting bracket (1b).3. Undo the connectors and disconnect the cooling radiator engine oil supply and return pipes, engine oil filter mounting side.4. Remove the cooling radiator engine oil supply and return pipes.

Refitting ( Removing

) 1. Place the cooling radiator engine oil supply and return pipes back in their housings.2. Connect the engine oil supply and return pipes to the engine cooling radiator, engine oil filter mounting side and tighten the connectors to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	-	-	-	-

3. Place the engine oil/power assisted steering fluid pipes upper mounting bracket (3a) back in its housing and secure it using the bolts (3b).4. Place the power assisted steering pipes lower mounting bracket (4a) back in its housing and fasten it using the bolt (4b).

Place the engine oil/power assisted steering fluid pipes lower mounting bracket back in its housing and fasten it using the nut.Connect the engine oil supply and return pipes to the engine cooling radiator, radiator side and tighten the bolts.Refill the engine oil lubrication system Op. 0010T11 ENGINE OIL CHECK LEVEL AND TOP UP.Proceed with refitting Op. 7055B54 UNDER-ENGINE GUARD - R R.Remove the car from the ramps.