1088E11 FANS WITH SINGLE ENGINE DUCT - R+R - Alfa - GT - eLearn

) Proceed with removal Op. 7055B54 UNDER-ENGINE GUARD - R RProceed with removalProceed with removal Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R RProceed with removalProceed with the removal Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R(Right and left sides).Proceed with removal Op. 7210E10 R.R. FRONT BUMPERProceed with removal- 7210A15 R.R. HEADLAMP HOUSING/FRONT WING CROSSMEMBER 1. Disconnect the electrical connections from the resistances for the engine cooling fans. Op. 5540B76 FRONT LIGHT CLUSTER WITH FOGLAMP ONE LH OR RH R R WITH INTERFERING PARTS REMOVED2. Disconnect the electrical connections from the engine fan motors. Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR

	Name	Connector
1	Engine fan adjustment resistor	See O10 ENGINE FAN ADJUSTMENT RESISTOR - 1

	Name	Connector
1	Engine fan adjustment resistor 2	See O12 ENGINE FAN ADJUSTMENT RESISTOR -2

	Name	Connector
2	Engine electric fan motor	See N11 ENGINE FAN MOTOR - 1

	Name	Connector
2	Engine fan motor 2	See N12 ENGINE FAN MOTOR - 2

1. Undo the bolts (1a) and remove the fans with the single cooling duct (1b).

) Place the fans with the single engine cooling duct back in their housings and secure them using the bolts.Connect the electrical connections to the engine fan motors.Connect the electrical connections to the engine cooling fan resistances.Proceed with refitting- 7210A15 R.R. HEADLAMP HOUSING/FRONT WING CROSSMEMBER .Proceed with refitting Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR.Proceed with the refitting Op. 5540B76 FRONT LIGHT CLUSTER WITH FOGLAMP ONE LH OR RH R R WITH INTERFERING PARTS REMOVED(Right and left sides).Proceed with refitting Op. 7210E10 R.R. FRONT BUMPER.Proceed with refitting Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.Proceed with refitting Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.Proceed with refitting Op. 7055B54 UNDER-ENGINE GUARD - R R.